Browsing by Author "Teixeira, S"
Now showing 1 - 4 of 4
Results Per Page
Sort Options
- Avaliação do desempenho de três câmaras de expansãoPublication . Abreu, S; Silva, LF; Teixeira, S; Marques, HC; Ramalhete, N; Antunes, HIntroduction: Several aspects are known to influence the drug distribution within the low respiratory tract, with particular emphasis on those related to the inhalation device. The aim of this work was to assess the performance of three spacers in the drug release, and also the quantity of active agent deposited inside these devices. Materials and Methods: In order to evaluate the behaviour of particles in suspension delivered through the Ventilan®HFA inhaler coupled to three different spacers (Volumatic®, AeroChamber MAX® and NebuChamber®) the Multistage Liquid Impinger (MSLI) was used, according to the Portuguese Pharmacopoeia. The mass of salbutamol sulphate deposited on the different impinger compartments and inside the spacer was determined by spectrophotometry, with the purpose of determining the percentage of cumulative mass for each spacer, and then the fine particle fraction. The results were compared statistically using a one-way analysis of variance (one-way ANOVA) with a Bonferroni post-hoc test. Results: About 40 to 50% of salbutamol sulphate was found deposited in the body of the three spacers. This deposition was slightly lower for NebuChamber® (average ± standard deviation of 43.8 % ± 11.6 %), in relation to Volumatic® (p=0.351) or AeroChamber MAX® (p=0.115). The fine particle fraction reached values of 28.2 ± 4.1%, 29.6 ± 2.4% and 30.9 ± 6.7% for Volumatic®, AeroChamber MAX® and NebuChamber®, respectively. Conclusion: The spacers showed to have similar efficiencies in the delivery of salbutamol sulphate in the last stages, and there was no relation between the results and the spacers characteristics such as volume, shape and material. Therefore, Volumatic® appears to be perfect for hospital use, since its big volume does not constitute a disadvantage, and its lower cost, when compared to the remaining two spacers, represents an advantage of utmost importance for public hospitals.
- Combined tools for Surgical Case Packages contents and cost optimization: a preliminary studyPublication . Alves, AC; Gonçalves, AM; Fernandes, JM; Vaz, I; Teixeira, S; Sousa, I; Pereira, JJ; Dória-Nóbrega, SThis paper presents a solution proposal based on mathematical and statistical tools to optimize Surgical Case Packages of an Operating Room (OR) in a Portuguese public hospital that it is the most complex environment in a hospital. In this particular hospital, more than 27000 surgeries/year are performed, employing, sometimes, misadjusted composition of standard surgical packages and non-optimized grouping of surgical instruments. Problem consequences are, among others, high transport of various surgical cases packages; high number of open cases and delays in surgical times following surgery. These type of problems are waste that do not add value to the service in the context of Lean Healthcare and must be eliminated using the most suitable tools. After the analysis, different tools were used: combinatorial analysis to optimize surgical cases composition and statistical analysis to identify the instruments usage and surgical basic case patterns. An optimization model was developed which produced a sterilizing initial solution of 135.24€. By identifying the most commonly employed instruments, it was concluded that some instruments have never been used and others rarely and some patterns were identified. The results achieved were based on minor sample and in a form of data collection that needs some adjustments
- Evaluation of the Performance of Three SpacersPublication . Abreu, S; Silva, LF; Teixeira, S; Marques, HC; Ramalhete, N; Antunes, HINTRODUCTION: Several aspects are known to influence the drug distribution within the low respiratory tract, with particular emphasis on those related to the inhalation device. The aim of this work was to assess the performance of three spacers in the drug release, and also the quantity of active agent deposited inside these devices. MATERIALS AND METHODS: In order to evaluate the behaviour of particles in suspension delivered through the Ventilan®HFA inhaler coupled to three different spacers (Volumatic®, AeroChamber MAX® and NebuChamber®) the Multistage Liquid Impinger (MSLI) was used, according to the Portuguese Pharmacopoeia. The mass of salbutamol sulphate deposited on the different impinger compartments and inside the spacer was determined by spectrophotometry, with the purpose of determining the percentage of cumulative mass for each spacer, and then the fine particle fraction. The results were compared statistically using a one-way analysis of variance (one-way ANOVA) with a Bonferroni post-hoc test. RESULTS: About 40 to 50% of salbutamol sulphate was found deposited in the body of the three spacers. This deposition was slightly lower for NebuChamber® (average ± standard deviation of 43.8 % ± 11.6 %), in relation to Volumatic® (p=0.351) or AeroChamber MAX® (p=0.115). The fine particle fraction reached values of 28.2 ± 4.1%, 29.6 ± 2.4% and 30.9 ± 6.7% for Volumatic®, AeroChamber MAX® and NebuChamber®, respectively. CONCLUSION: The spacers showed to have similar efficiencies in the delivery of salbutamol sulphate in the last stages, and there was no relation between the results and the spacers characteristics such as volume, shape and material. Therefore, Volumatic® appears to be perfect for hospital use, since its big volume does not constitute a disadvantage, and its lower cost, when compared to the remaining two spacers, represents an advantage of utmost importance for public hospitals.
- pMDI Sprays: Theory, Experiment and Numerical SimulationPublication . Oliveira, RF; Teixeira, S; Teixeira, JC; Silva, LF; Antunes, H